Targa DR-5100x, Инструкция по эксплуатации, Страница: 23 / 38

23
Timer Recording
The program timer switches the unit on and off to record a TV
program at a preset time.
Use programmed recording to automatically start and start recording
at a later date. The DVD recorder will switch to the right program
number and begin recording at the correct time.
1. Set the record program(s) first.
(Record Status—>Record Time, Frequency , VPS, Input
Source, Channel, Quality & Title)
Note : The clock must be set before this setting.
(1) Press SETUP in no disc mode or full stop mode, “Menu” screen
appears on the TV screen.
(2) Press to select “Record Program ”, then press ENTER or ,
“Record Show” is highlighted.
(3) Press ENTER or , “Record Show ”screen appears.
4:3 PS
4:3 LB
16:9 Wide
Press SETUP to exit Current selection
Press SETUP to exit
Record Show
Press or use the number keys on remote
to change settings.
Back
DONE
Year Month Day
S M T W Th F Sa
2004 01 01
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
4:3 PS
4:3 LB
16:9 Wide
Press SETUP to exit Current selection
Press SETUP to exit
Record Show
DONE
Back
Press to change settings.
VPS
OFF
4:3 PS
4:3 LB
16:9 Wide
Press SETUP to exit Current selection
Press SETUP to exit
Record Show
Press or use the number keys on remote
to change settings. Use the international time
for the hour (00-23).
Hour Minute
Hour Minute
Back
Start 00 : 01 End 01 : 01
DONE
4:3 PS
4:3 LB
16:9 Wide
Press SETUP to exit Current selection
Press SETUP to exit
Record Show
Verify the settings. Press Enter to edit.
Record Time 00:01 01:01
Frequency Once 2004/01/01
Quality SP(2hr)
Input Source Tuner
Title 20040101
Channel
Done Cancel
VPS OFF
P01 ARD
4:3 PS
4:3 LB
16:9 Wide
Press SETUP to exit Current selection
Press SETUP to exit
Record Show
S M T W Th F
Sa
DONE
Back
Press ENTER to select day(s) or press
ENTER twice to deselect day(s).
v
(4) Press / to select the item ( Record Time, Frequency, VPS,
Input Source, Channel, Quality & Title)
Setting Record Time
Note : If you have set “Record Show” already, open “Record
List ” to check the list. Remove the unnecessary
program from the list first.
1. Select “Record Time ”.
2. Press ENTER , the start and end time screen appears.
3. Press / ( or the number buttons on the remote control ) to set
the start and end times and press / to move the cursor..
4. Press to select “DONE ”, then press ENTER, the record time is
set. The “Record Show ”screen returns.
Setting Frequency
1. Select “Frequency ”.
2. Press ENTER, the Record Show screen appears.
3. Press / to select the “Once ” or “Repeat ”.
4. If select “Once ”, Press ENTER , then the calendar screen
appears.
5. Press / ( or the number buttons on the remote control ) to set
the record date and press
/
to move the cursor..
6. If select “Repeat ”, Press ENTER , then the week screen
appears.
7. Press to select “DONE ”, then press ENTER, the record date is
set. The “Record Show ”screen returns.
Setting VPS
1. Select “VPS ”.
2. Press ENTER , the VPS screen appears.
3. Press / to select “ON ”or “OFF ”.
4. Press ENTER or to select “DONE ”, then press ENTER , the
recording VPS is selected. The “Record Show” screen returns.