Output Power @12.6VDC
Freq.:
Input Sensitivity (Level 100%):
Musical Consumption @12.6VDC:
1 OHM:
Minimum Output Impedance:
8 OHMS:
Signal- to-noise Ratio:
Crossover
4 OHMS:
Frequency Response (Full Range):
Number of Channels:
HPF (High Pass Filter):
LPF (Low Pass Filter):
Efficiency:
Input Impedance:
Protection System:
2 OHMS:
Minimum Supply Voltage:
Maximum Supply Voltage:
Boost:
Idle Consumption:
Rated Power Consumption:
Weigth:
Dimensions (W x H x L):
Technical features
The values as above are typical and may vary, due to electronic components tolerance or manufacturing process.
*Rated power with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistive loads, measured with Audio Precision APx525 audio analyzer or equivalent and the
product at lower than 50°C case temperature and 12.6V supply voltage.
**Frequency response measured at 2 times the minimum impedance.
For further informations or questions, visit our website or contact TARAMPS support.
Bass Boost:
--------------- 1920W RMS 3000W RMS
10Hz ~ 90Hz (-12dB/8ª) Variable
01
1920W RMS 3000W RMS ---------------
--------------- --------------- 1920W RMS
220mV
1 Ohm 2 Ohms 4 Ohms
>90dB
10Hz ~ 18KHz (-3dB)**
3000W RMS --------------- ---------------
90Hz ~ 18KHz (-12dB/8ª) Variable
0 ~10dB (50Hz)
15K Ohms
Short-Circuit to Output, Short on output compared to GND,
Low impedance at output, low/high supply voltage and Thermal protection
9VDC
16VDC
1A 1.5A 1.2A
79% 82% 85%
150A 145A 138.8A
35Hz ~ 55Hz
300A 290A 277.7A
228 x 70 x 218mm (8.98" x 2.76" x 8.58")
2.5Kg (5.5lb)
fc=18K
12
