Taramps DS 800X4, Инструкция по эксплуатации

Страница: 13 / 14

Technical features
10
Output Power / @12.6VDC - 1 OHM:
Output Power / @12.6VDC - 4 OHMS:
Minimum Output Impedance:
Number of Channels:
Output Power / @12.6VDC - 2 OHMS:
2 Bridged Channels:
Signal- to-noise Ratio:
Input Sensitivity (Level 100%):
Frequency Response (Full Range):
Crossover
HPF (High Pass Filter):
LPF (Low Pass Filter):
Input Impedance:
Protection System:
Minimum Supply Voltage:
Maximum Supply Voltage:
Musical Consumption / @12.6VDC:
Idle Consumption:
Dimensions (W x H x L):
Rated Power Consumption:
Weigth:
4
>88dB
90Hz (-12dB/8ª) Fixed
10K Ohms
10Hz ~ 22KHz (-3dB)**
250mV
90Hz (-12dB/8ª) Fixed
Output overload
9VDC
16VDC
1.43Kg (3.15lb)
173 x 52 x 227mm (6.81" x 2.05" x 8.94")
The values as above are typical and may vary, due to electronic components tolerance or manufacturing process.
**Frequency response measured at 4 ohms load, in 4 channels mode.
*Rated power with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistive loads, measured with Audio Precision
APx525 audio analyzer or equivalent and the product at lower than 50°C case temperature and 12.6V supply voltage.
For further informations or questions, visit our website or contact TARAMPS support.
1.0A
102A
51A
1 OHM
800W RMS (4 x 200W RMS)*
_
2 x 400W RMS
544W RMS (4 x 136W RMS)
86A
1.4A
43A
_
2 OHMS
800W RMS (4 x 200W RMS)*
2 x 400W RMS
544W RMS (4 x 136W RMS)