Taramps DS 800X4, Инструкция по эксплуатации

Страница: 11 / 14

Output & power supply connector
Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance
lower than the supported at the output.
2 OHMS 2 OHMS
For amplifier 1 ohm
Resulting
impedance:
1 OHM
4 OHMS 4 OHMS
For amplifier 2 ohms
Resulting
impedance:
2 OHMS
POWER
BRIDGE BRIDGE
POWER
BRIDGE BRIDGE
1
1
2
DS 800X4 (2 Ohms) - For STEREO connections, the minimum impedance is 2 ohms at each
channel; for BRIGDE connections is 4 ohms.
DS 800X4 (1 Ohm) - For STEREO connections, the minimum impedance is 1 ohm at each
channel; for BRIGDE connections is 2 ohms.
1 - OUTPUT: To connect the speakers. Follow the polarity and the minimum impedance
recommended.
See the examples below:
To combine speakers, the resulting impedance must be taken in consideration.
2 - POWER (Power Supply Connector): The connector terminal (+) must be connected to the
battery's positive pole with a 10mm² (minimum) wire gauge. The connector terminal (-) must
be properly connect to the battery's negative pole with a same wire gauge. The remote
terminal must be connected to the Head Unit REMOTE output with a 0.75mm² wire.
10
Protection system