Taramps DS 800X4, Инструкция по эксплуатации

Страница: 10 / 14

09
Functions & inputs
CROSSOVER
HPF LPF
FULL
22KHz 90Hz
Audio band
10Hz
CROSSOVER
HPF LPF
FULL
22KHz 90Hz
Audio band
10Hz
LED indicator
ON: Indicates that amplifier is on.
3 - CROSSOVER: Set the operating mode of amplifier :
2 - LEVEL: It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals
levels of nearly all models of Head Units found in the market.
1 - INPUT: Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using
good quality shielded cables to avoid noise interference.
SELECTOR POSITION - HPF - (HIGH PASS)
SELECTOR POSITION - FULL
Amplifies the whole audio range, responding from 10Hz
to 22KHz. This function is normally used when there is an
external crossover in the system.
SELECTOR POSITION - LPF - (LOW PASS)
Amplifies only bass signal, the response is limited to
90Hz (-12dB/8ª), an optimal frequency cutoff for sub-
woofers.
Amplifies signals with more intensity above 90Hz. This
type of function is used mid-bass, mid-range speakers or
tweeters.
CROSSOVER
HPF LPF
FULL
Audio band
10Hz 22KHz
CH3 CH1
CH4 CH2
LEVEL
0 MAX.
LEVEL
0 MAX.
HPF LPF
FULL
HPF LPF
FULL
INPUT INPUT
CROSSOVER CROSSOVER
1 1 2 2
3 3