Taramps Bass 1200, Руководство пользователя

Страница: 10 / 12

Amplifier 2 OHMS Amplifier 1 OHM
2 OHMS 2 OHMS
Resulting
impedance:
1 OHM
4 OHMS 4 OHMS
Resulting
impedance:
2 OHMS
To combine loudspeakers, the resulting impedance must be taken into consideration.
1 - SPEAKER: Output (positive and negative) to loudspeakers connection. Follow the polarity
described and the minimum impedance recommended.
3 - REMOTE TERMINAL: The remote CD/DVD Player output must be connected by a 1.5mm²
(15 AWG) cable.
2 - POSITIVE POWER SUPPLY TERMINAL: Use a 16mm² (5 AWG) cable directly from the
positive battery terminal with fuse (60A), as close as possible from the battery.
4 - NEGATIVE POWER SUPPLY TERMINAL: A 16mm² (5 AWG) cable as short as possible must
be used, connected to the negative battery pole.
It is recommended that all cables must have tinned ends to improve electrical contact
and all power inputs must be used.
LOW VOLTAGE PROTECTION: Shutdown the amplifier if the battery voltage is below 9V.
HIGH VOLTAGE PROTECTION: Shutdown the amplifier if the battery voltage is above 16V.
SHORT-CIRCUIT PROTECTION: Shutdown the amplifier when detect a short-circuit or
impedance lower than the supported at the output.
REM
SPEAKER
POWER
1 3 2 4
Amplificador 1 Ohm / 2 Ohms
Protection Systems
09
Power supply connector