Taramps Bass 1200, Руководство пользователя

Страница: 8 / 12

You can find below some key recommendations to get the most out of your amplifier:
1- Read this instruction manual carefully before carrying out any connection;
2 - Check carefully the polarity of power supply wiring (battery's positive and negative
terminals) loudspeakers and the minimum speaker impedance;
Any connection to the amplifier input or output must be carried out when amplifier is
off;
3 - It is compulsory to install circuit breakers to protect against overloading. The circuit
breaker must be installed as close as possible to the battery and sized up according to the
amplifier;
5 - Amplifier must be installed in a firm and ventilated area;
6 - In order to avoid interferences, the signal cable (RCA) must be away from the original
wiring of vehicle or from any other power supply cable;
4 - The gauge of power supply wiring is extremely important both to reach the desired
amplifier output and to the amplifier's safety. Use the wire gauge recommended in this
manual (page 05/06). Using wire gauges below the specified value will result in power loss
and overheating of cables. It is important that the power supply cables are the shortest
possible;
7 - The amplifier must be installed by a qualified professional.
Taramps reserves the right to modify the contents of this document at any time without prior notice and does
not have the obligation to apply the changes in units which were previously produced.
Congratulations on your purchase of Taramps product.
This manual covers all features, operations and instructions to solve any doubt that may
happen during the installation. Please take some time to read manual carefully in order to
ensure the proper installation and the use of all benefits that this product can offer.
It was developed in a modern laboratory and with the latest technology.
For questions, please call +55 (18) 3266-4050 , e-mail support@taramps.com.br or visit
www.taramps.com.br .
07
Key recommendations
Introduction