8.
Never leave the device while it is in operation.
9.
Never start up or operate the device in closed areas.
0
10.
Do not touch the muffler. Since the temperature around the muffler of the engine is above 80 C, there is a danger of
hurting yourself.
11.
During the operation if you hit any item with the device, stop the engine and do not operate before repair.
12.
To avoid fire,
-Do not fill the fuel tank above the fuel level sign.
-To prevent pouring of fuel onto the engine and frame use the measuring cup as well as the funnel.
-While filling the tank with funnel do not smoke and keep flammable materials away.
-Do not operate the device in areas with explosive materials.
-Do not overturn the machine during servicing,when there is fuel in the fuel tank.
-Do not fill the fuel tank while the engine is operating.
-Do not pull out the fuel hose while the engine is operating or when it hot.
-Do not start up the device without ignition plug.
13.
Do not omit any of the parts on the knapsack mistblower.
14.
Stop the engine if you feel an unusual vibration and apply to the authorized service agent.
15.
Do not operate the device against the wind.
16.
Keep the product out of the direct sunlight to protect it against the influences of ultraviolet radiation.
17.
Clean the formula tank after each use with clean water.
18.
Empty the fuel tank after every use.
19
.For a safe operation, always use original spare parts.
20.
The operator will carry all responsibilities resulting from not using original spare parts.
21.
Except cleaning, for all the maintenance operations, ask for an authorized service agent. The operator is responsible
from the consequences of not obeying this instruction.
22.
Pull out the ignition plug after finishing the operation.
23.
Wash yourself after each operation with clean wate
24.
Do not operate the device without its elbow.
25.
The excess saturated formula left in the tank have to be removed by observing the safety rules. Apply the valid security
methods of the formula producers.
26.
Check the O-rings and gaskets before using mistblower, after 100 hours of operation and in case of wearing out they
must be replaced with new ones.
27.
While operating this device, keep a distance of 15 m. from other people and items.
2-ALETÝN MONTAJI (Þekil. 2)
Boðumlu hortumu (3) dirseðe (4) geçirin.Kelepçe-1 (11) takýp sýkýn.Püskürtme borusunu boðumlu hortuma geçirerek
kelepçeye-12 yi sýkýn.Ýlaç hortumu-1 (10) musluðun çýkýþýný ve debi ayar musluðunu (7)birleþtirin.Ýlaçlama hortumunu
hortum tutucuya,sývý emiþ borusuna ise hava nipeline takýn.Püskürtme borusunun (5)ucuna,püskürtme baþlýðýný (6)monte
edin.Ayar somunu vasýtasý ile püskürtme baþlýðýný ileri ve geriye doðru hareket ettirebilirsiniz.Bu size geniþ ve dar açýda
ilaç atma imkaný saðlayacaktýr.
(5)
Þekil.2
(Figure.2)
Parçalarýn Tanýmý (Þek.2)/
Parts Description (Fig.2)
1-Depo/
Tank
2-Motor/
Engine
3-Boðumlu Hortum/
Flexible Tube
4-Dirsek/
Elbow
5-Püskürtme Borusu/
Spray Tube
6-Püskürtme Baþlýðý/
Nozzle
7-Debi ayar musluðu/
Dosage Tap
8-Ýlaç hortumu-2/
Chemical Hose-2
9-Musluk(On-Off)/
Tap (On-Off)
10-Ýlaç hortumu-1/
Chemical hose-1
11-Kelepçe-1/
Clamp-1
12-Kelepçe-2/
Clamp-2
13-Kabza/Handle
