Tar River SSC-100, Руководство оператора

Страница: 20 / 34

20
Fertilizer Spreader SSC - SSS - SP Series
Operating Instructions
Spread Pattern (Continued)
Spread pattern can further be regulated by adjusting the Spreader Wings located on the Spreader Disc, (See
Fig. 5) Loosen the bolt
“ A ” (do not remove) and remove Bolt “ B ”. Rotate the Spreader Wings Clockwise to
spread material more to the left. Rotate Spreader Wings Counter - Clockwise to spread material more to the
right. Be sure to tighten hardware to proper torque settings. See “ Torque Specifications ” Chart on page 23.
Amount of material spread.
1. Loosen the Adjustment Knobs located on the Tie Rod Plate (See Fig. 6). Slide the Shutter in
towards the hopper to spread less material, slide out away from the hopper to spread more ma-
terial. Sliding the handle all the way in will close the shutters and no material will dispense.
Fig. 5
Clockwise Counter - Clockwise
Spreader Wing
Close
Open
Adjustment knob
Fig. 6