Tar River SSC-100, Руководство оператора, Страница: 17 / 34

17
Fertilizer Spreader SSC - SSS - SP Series
Operating Instructions
Spreading Operation
Consider the following factors when determining material quantity distributed per acre:
1. Operating speed is determined by ground conditions. Faster speeds can be obtained on dry, even, cleared
land. Slower speeds are required for uneven ground. Making a practice run will help determine the correct
setting for spreading as conditions vary.
2. Type or material distributed, density, moisture content, etc.
3. Width of spreading area.
4. Spreader lever position.
Spreading Adjustment SSC - 100, SSC - 150
Spreading can be adjusted 2 ways.
1. Spread pattern.
2. Amount of material distributed.
Spread Pattern
The spread pattern can be regulated by sliding the Adjustment Lever Left, Right, or Center. (See Fig.2)
RH
LH
Fig. 2