Tar River SRB-870, Руководство пользователя

Страница: 15 / 70

15
Mini Round Baler SRB - 870
Assembly
Threading the twine:
The twine is located in the twine storage compartment of the baler (located in the front of the baler). This baler
can handle up to two rolls of twine at a time.
If using two rolls of twine, find the leading edge of roll 2 (usually found under the twine ’ s label). Next find the
end of roll 1 and join the two rolls with a knot. Be sure to tie a knot small enough to not jam the mechanism or
break the twine.
Routing twine:
Step 1 : Feed the leading end of twine through the “ Twine Guide ”.
Step 2 : Feed twine through the RH wall of twine storage compartment as shown below.
Single Roll Routing Double Roll Routing
Twine Guide
Roll 2 Roll 1
Twine Guide