Tar River PRZ-5500, Руководство пользователя, Каталог запасных частей, Гарантия

Страница: 10 / 71

401 Jeffreys Road
Rocky Mount, NC 27804
Tel: 252-442-0700
Web: www.br-equipment.com
•
When commissioning and transporting the machine, inspect its technical condition to
check for damage.
•
It is forbidden to stand under the raised arms of the tedder, as it may result in being
crushed by the structural elements.
•
When adjusting, do not place your fingers and limbs between the structural elements of
the machine.
•
It is forbidden to leave a tractor’s cabin when the machine is running, and before all the
rotating parts have stopped.
•
Operator of the vehicle working with a tedder, must ensure that no person is approaching
the machine during its operation.
•
Operator of the vehicle, working with a tedder, must ensure that no person is approaching
the machine during its operation, and people should maintain a
distance of not less than
50 meters from the working tedder.
•
Before switching on the machine drive, place the machine in the working position.
•
You must not overload the PTO shaft of the machine by engaging the clutch too quickly.
•
When turning, reversing, or maneuvering the machine, you must ensure, that your
visibility is adequate, or get assistance from a properly trained person.
•
It is prohibited to work while reversing the vehicle.
•
When connecting the hydraulic lines, make sure that the hydraulic system is not
pressurized.
•
Do not stay between the vehicle and the machine when the vehicle engine is running.
•
Working on slopes exceeding 10% is not allowed.
•
Exercise particular caution when working on slopes.
•
When driving on curves and turning, switch off the PTO drive.
•
It is forbidden to operate the machine too close to public areas (parks, schools, etc.) You
must also avoid stony grounds to keep stones and other objects being thrown from the
machine.
•
Do not allow the PTO working speed to exceed 540 rpm, while driving speed must be
adjusted to the type of work being done.
•
Working with damaged or incomplete articulated power-take off shaft is forbidden. It is
strongly forbidden to work without covers on moving parts.
•
The jointed-telescopic shaft has marks indicating, which end must be connected to the
tractor before work please make sure that the direction of rotation of the shaft is correct.
•
Never leave the vehicle unattended with the engine running. Before leaving the driver's
seat (the cabin) turn off the engine of the vehicle, remove the ignition key, and apply the
handbrake.
•
Avoid loose pieces of clothes during the operation, assembly, disassembly, or adjustment
of your machine to keep your clothing from being entangled.