Tar River PRZ-5500, Руководство пользователя, Каталог запасных частей, Гарантия

Страница: 34 / 71

401 Jeffreys Road
Rocky Mount, NC 27804
Tel: 252-442-0700
Web: www.br-equipment.com
7. Operation and maintenance
7.1. Maintenance after work
After the work is finished, the machine should be thoroughly cleaned and washed with running
water stream. In the case of high-pressure devices, exercise caution and do not direct the
stream directly towards any types of labels on the machine and elements such as bearings,
shaft joints, etc., It is recommended that cleaning and washing be carried out on the wash
equipped with a water treatment system or a clarifier for waste neutralization.
Having performed the cleaning and drying of the machine, check the general technical
condition of all sub-assemblies and, if needed, remove any found damage or replace a worn
element with a new one. In case of varnish coating damage, remove any mechanical residues
of old painting, degrease, and then apply ground coat. When the ground coat is dry, apply the
varnish coating. Replace damaged and worn-out parts with new ones.
Check all the screwed
joints, tighten the loose screws and nuts according to Table
4
.
Attention:
Manufacturer of the machine, Tar River Manufacturing provides all spare parts.
Durability 6.8 8.8 10.9 12.9
Metric thread Tightening torque [Nm]
M5 4.5 5.9 8.7 10
M6 7.6 10 15 18
M8 18 25 36 43
M10 37 49 72 84
M12 64 85 125 145
M14 100 135 200 235
M16 160 210 310 365
M18 220 300 430 500
M20 310 425 610 710
M22 425 580 820 960
M24 535 730 1050 1220
Table 4 Tightening torque values for screws and nuts.
Lubricate the mower according to the instruction –
7.2 Machine lubrication
.
All safety signs placed on the machine should be kept clean.
7.2. Machine lubrication