15
Please Remember
– Only use tablet or pellet salt in your softener!
14
Controller features
User information
SALT MONITOR SYSTEM
The water softener has a salt monitor indicator light to remind you to add salt to the storage tank.
NOTE:
You must set salt level each time salt is added to the water softener.
NOTE:
The salt monitor system estimates salt levels, and accuracy will vary with different salts.
To set this monitor system:
1
Lift the salt lid and level the salt in the
storage tank.
2
The salt level scale, on the brinewell inside
the tank, has numbers from 0 to 4, 5 or 8,
depending on the model (see diagram below).
Observe the highest number the levelled salt is
at or closest to.
3
Press the SET SALT LEVEL button as many times
as necessary to make the salt level bars in the
display (see diagram below) match the number
on the brinewell. At level 2 or below, the
“Low Salt” indicator will fl ash.
4
If you want to turn the salt monitor off, press
the SET SALT LEVEL button past the highest
number (4, 5 or 8, depending on the model)
until “OFF” shows in the display next to the
number 8.
AFTER INSTALLATION
Now your Tapworks water softener is installed
you can start to enjoy the benefi ts of soft water.
Your Tapworks water softener is automatic, there
is nothing you need to do but keep it topped up
with tablet/pellet salt.
DO NOT USE GRANULAR OR BLOCK SALT.
Softened water will gradually replace the hard
water in the storage tank over a period of
normally 7 days. However, this can take longer in
larger houses.
TESTING YOUR WATER
You can test the water hardness from the softened
supply using the test kit supplied. If within one or
two drops the sample remains a blue colour this
indicates soft water.
WARRANTY CERTIFICATE
Please register your warranty online at
www.tapworks.co.uk
HELP LINE
Call
01494 480 621
during normal working
hours if you have any queries about your water
softener.
THE USE OF SOFTENED WATER
Washing machines
– you will need much less
soap powder. In most washes one tablespoon will
be suffi cient. Too much lather and clothes will not
rinse properly.
Dishwashers
– you will no longer need to fi ll
your unit with salt, as this was used to soften the
water in the dishwasher.
Cleaning sinks, baths and basins
– you
will fi nd that your cleaning chores are reduced
and you will use less cleaning product, as
cleaning becomes a quick wipe around.
Occasionally ‘spotting’ may result but this is
easily rinsed off and nothing to worry about.
Hard water
– one household tap and any
garden taps should be left on a hard water supply.
Softened water contains a small amount of sodium.
In four pints of softened water the sodium content
is about the same as in ¼ pint of milk. Drinking
softened water is not recommended for people on
low sodium diets or babies on formula feed.
Steam irons/car batteries
– only use
distilled or deionised water, not softened water.
Copper staining
– this can be caused by new
pipework and should disappear after a short time,
simply wipe away any deposit. If this persists,
poor earthing may be allowing electrolytic
corrosion – contact an electrical engineer.
LEVEL
SALT
Salt level
Brinewell
Salt level bars
Numbers
Содержание NSC9PRO
Страница 12: ...22 Notes...
