ETS Database Parameters Coupler
MECps
- 19 -
3.2
Main Line
Setting “transmit all” is intended only for testing use.
Please do not use for normal operation.
If the
parameter “Send confirmation on own telegrams” is set to “yes”, MEC
ip-Sec
systematically sends an ACK on any own routed telegram. For example, since repeaters
do not use filter tables, it is useful to have an ACK sent along with routed telegrams.
Figure 9: Main Line Tab Parameters
Table 8: Main Line Tab Parameter Settings
ETS Parameter
Settings
[Factory Default]
Comment
Telegram routing
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route
configure
[Group and Physical: filter]
block:
no telegrams are routed.
filter:
telegrams entered in the
filter table are routed.
route:
all telegrams are routed.
configure:
the following parameters
must be set manually.
Group telegrams:
Main group 0…13
transmit all
(not recommended)
block
filter
[filter]
Group telegrams (main group 0…13)
are all routed.
Group telegrams (main group 0…13)
are all blocked.
Group telegrams (main group 0…13)
are routed if entered in the filter table.
Group telegrams:
Main group 14…31
transmit all
(not recommended)
block
filter
[filter]
Group telegrams (main group 14…31)
are all routed.
Group telegrams (main group 14…31)
are all blocked.
Group telegrams (main group 14…31)
are routed if entered in the filter table.