TapFlo CTV 40-13.5, Инструкция по эксплуатации, Страница: 6 / 24

Instruction manual CTV vertical pumps 6
0. GENERAL
0.6 Health & safety
Electric safety
Do not carry out any maintenance operation on the pump while it is running or before it has been
disconnected from the power supply. Avoid any danger caused by electric power (for details see
current regulations in force). Check that electrical specifications on the data plate are equivalent
to the power supply to which it will be connected.
Chemical hazards
Avoid pumping liquids, even in different moments that may cause chemical reactions without
having cleaned the pump.
Temperature hazards
The cold or hot parts of the machine must be protected to avoid accidental contacts.
Rotating parts
Do not tamper with the protection of the rotating parts, do not touch or approach rotating parts in
movement.
Noise level
CTV pumps, including the motor, in normal operating conditions produce a sound level below
80 dB(A). The major sources of noise are: liquid turbulence in the plant, cavitation or any other
abnormal operation that do not depend from the pump construction nor the pump manufacturer.
The user must provide suitable protective means if the sources of noise could produce a harmful
noise level for operators and for the environment (in compliance with current regulations).
Modifications and Spare parts
Any changes concerning the service of the pump as originally purchased, can be executed only
after written approval from Tapflo.
It is recommended to use only genuine Tapflo spare parts and approved accessories. The use
of non-original spare parts or non approved accessories will void warranty and removes any re -
sponsibility on our behalf for any damage caused to people or things.
STOP
!
STOP
STOP
STOP