TapFlo CTV 40-13.5, Инструкция по эксплуатации, Страница: 4 / 24

Instruction manual CTV vertical pumps 4
0. GENERAL
0.1 Introduction
CTV is a vertical, seal less centrifugal pump made from PP, PVDF or stainless steel AISI 316L.
With proper attention to maintenance, CTV pumps will give efficient and trouble free operation. This
instruction manual will familiarise operators with detailed information about installing, operating
and maintaining the pump.
0.2 The warning symbols
The following warning symbols are present in this instruction manual. This is what they say.
This symbol stands next to all safety instructions in this instruction manual where
danger to life and limb may occur. Observe these instructions and proceed with ut -
most caution in these situations. Inform also other users of all safety instructions. In
addition to the instructions in this instruction manual, the general safety and accident
prevention regulations must be observed.
This symbol signals possible danger caused by the presence of electric fields or live
wires.
This signal stands at points in this instruction manual of particular importance for com-
pliance with regulations and directives, for correct work flow and for the prevention of
damage to and destruction of the complete pump or its subassemblies.
0.3 Qualification and training of personnel
The personnel in charge of installation, the operation cycle and maintenance of the pumps we
produce must be qualified to carry out the operations described in this manual. Tapflo shall not be
held responsible for the training level of personnel and for the fact that they are not fully aware of
the contents of this manual.
STOP
!
STOP