TAPCO TOOLS Windy SP Port-O-Brake, Руководство по эксплуатации

Страница: 11 / 12

11
TapcoTools.com 800.521.8486
Replacing the shoe Casting
Remove Hex Screws from Back
of Shoe Casting
Remove the four (4) Hex Head Screws
holding the Shoe Casting to the Bottom
rails front and back.
5 6
Open Brake
Move Locking Handle to right.
Remove Top Yoke Pin
With Brake unlocked remove
Cotter Pin from Top Yoke Pin and
disengage handle.
Remove Sliding Bar
Grasp and pull Sliding Bar to
the right and remove.
1 2 3
4
Tools needed: socket wrench with 7/16" socket, Phillips screwdriver
Remove Hex Head Screws
Holding Clamping Bar
This will allow you to reach flat head
screws holding Fixed Hinge.
Remove Pivot Arm
Remove Pivot Arms and springs and
replace the Shoe Casting. When replac-
ing, make sure all fasteners are tight
and flush.
7
Remove Hex Screws from
Front of Shoe Casting
Remove Flat Head Screws from Fixed
Hinge on the Shoe Casting to be
replaced.