Tansa LTT 303, Руководство пользователя

Страница: 21 / 44

TURNSTILE MECHANISM INFORMATION
4- Reverse direction blocking tab: Activated 30 degrees after the start of the tour to prevent
the arm to rotate back.
5- Shock absorber: Absorbs and stops the impact during centering of the arm.
6- Balance springs: Supports the movement of the slide assembly on the cam.
7- Tour disc: Enables the tour to be detected by passing through the sensors during the rotation
of the arm.
4.3.1 Shock absorber adjustment
Figure 4.7 Shock absorber and hex key
The shock absorber adjustment was made at the factory at room temperature and tested
before delivery. If the temperature of the environment is less than 10 degrees or more than 35
degrees, it should be readjusted according to temperature conditions.
To adjust the shock absorber, follow the instructions below;
1. Loosen the allen bolt on the back of the shock absorber with a 1.5 mm hex key delivered in
the turnstile. 1 or 1.5 turn would be enough for loosening. Do not completely remove the
allen bolt when loosening. The shock absorber can not be adjusted as it can not be
reassembled again when dislocated.
2. There are numbers from 0 to 9 on the back side. Turn towards zero to soften the shock
absorber, and towards "9" to harden it.
3. When you find the right setting, screw the loosened allen bolt to complete the process.
| 21 |