Tansa LTT 303, Руководство пользователя

Страница: 23 / 44

TURNSTILE MECHANISM INFORMATION
When the turnstile switches to the "Emergency mode", the "Green arrow" is continuosly
blinks on the direction indicator showing that "continuous free pass" is allowed. At the same, if the
buzzer on the control card is on, it gives audio warning. SW7 position does not change the working
of LEDs in emergency mode.
4.5 Supply unit and grounding
The power supply of our turnstiles is shown in Figure 4.10. The phase (L), neutral (N) and
grounding inputs of the supply unit are as shown in the figure. The supply unit is grounded by a
cable connected to the chassis from the grounding part. Therefore, it is necessary to ground the
turnstile frame, not the adapter. In this way, you can ground the turnstile frame first, and then the
supply unit through the frame.
| 23 |
When the power reach the turnstile first, entry and exit guiding indicators show "red no-entry"
sign as standard. The guiding indicator will change to "Green arrow" for the free passing
direction set with function buttons. If the the free passing direction is not set with function
buttons, the 'red no-entry' sign remains. In the case of connecting a reader, coin unit, remote
control, pushbutton and similar accessories to the turnstile, the guiding indicator shows the
"Green arrow" while waiting in the locked position after the first pass is allowed. It will continue
to show "Red no-entry" for the duration of passing.
Figure 4.10 Supply unit