TANGRA HP 30, Инструкция по установке и эксплуатации

Страница: 15 / 32

User manual TANGRA HP30 - Rev. 04 - 2014-03-28 15
6.4.1 Leveling of pellet boiler TANGRA CL35
•
Remove the packing of the boiler and the bunker.
•
Place the boiler in the technical room (take into account the dimensions shown in fig.2
(6.1).
•
Level the boiler body using the two front leveling screws (fig.3) and the back leveling
screw (fig.4)
fig.3 fig. 5
•
The pellet storage tank is placed on the right side of the boiler body and is leveled in a
way, similar to the boiler body. Both units shall be leveled one to another and to fit.
fig.6
•
Both parts are connected with 6 bolts M8 – two based in the main plate and 4 in the
upper side of the tank. Precise leveling is required.
•
Connect the burner with 4 bolts M8 to the previously installed adapter flange of the
boiler.
•
Pull the main power cable with the connector and both pneumatic hoses through
the service opening on the left side of the burner. Connect the blue hose to the
connection, which is closer to the burner fan (pneumatic hose Ø4 for the flowmeter) and