Tangent VITA 474, Руководство пользователя

Страница: 81 / 84

81
NOTE:
The following discussion applies to DOS. Contact Tangent support or visit the
Tangent website for drivers for other operating systems.
The Watchdog Timer is a hardware-based timer that attempts to restart the system when it
stops working. The system may stop working because of external EMI or software bugs.
The Watchdog Timer ensures that standalone systems like ATMs will automatically attempt
to restart in the case of system problems.
A BIOS function call (INT 15H) is used to control the Watchdog Timer.
INT 15H:
Table C-1: AH-6FH Sub-function
Call sub-function 2 to set the time-out period of Watchdog Timer first. If the time-out value
is not zero, the Watchdog Timer starts counting down. When the timer value reaches zero,
the system resets. To ensure that this reset condition does not occur, calling sub-function
2 must periodically refresh the Watchdog Timer. However, the watchdog timer is disabled
if the time-out value is set to zero.
A tolerance of at least 10% must be maintained to avoid unknown routines within the
operating system (DOS), such as disk I/O that can be very time-consuming.
AH
– 6FH Sub-function:
AL
– 2: Sets the Watchdog Timer’s period.
BL: Time-out value (Its unit-
second is dependent on the item “Watchdog
Timer unit select” in CMOS setup).