T&R Sports T25CM, Руководство пользователя

Страница: 12 / 24

USING THE AUDIO FUNCTION
As the figure shows, plug one end of the audio
cable to the audio jack on computer, and then
plug the other end of the audio cable to MP3 player.
The speaker on the computer will then play the
music from MP3 player. The volume of speaker can
only be adjusted by MP3 player.
BUILD-IN MP3 PLAYER
The computer have build-in MP3 player function, it can be operated with following
instruction:
Turn on the power of treadmill, attach the Safety key to wake display up, and then plug-in
USB flash, then the build-in MP3 player will play the music file in the flash.
Press button will decrease the voice of speaker. Press button will
increase the voice of speaker. Press button play next music, Press
button to play previous music, press this button down .
CONNECT SMART PHONE
If the treadmill have the bluetooth function, then connect the smart phone as follow
steps:
STEP1: Turn on the Bluetooth of the smart phone, search the device, and click to
connect the devices when RUN MUSIC appears.
STEP2: After the connection, the voice of smart phone will be played by the speaker on the
computer.
USER PROGRAM
This program is for user to edit a personal program; the speed and incline of each
segment can be edited according as personal’s desire. There are 18 segments on
this program for user to edit workout program.
Once the program is set, it will be stored on the computer, the computer will
proceed the program by pressing START/STOP button. There are totally 3 user
program can be edited.
If you want to re-edit the program, just follow the steps described as bellow.
STEP 1:
Attach the Safety key to wake display up; the treadmill then will be on
start/ready status, keep pressing PROG button until the speed window display U-1, then
the TIME window display 30:00, press SPEED+/- to set the program time.
STEP 2: Press MODE button to set segment 1, press /- to set incline and press
SPEED+/- to set speed on this segment. After finish setting segment 1, press MODE
button to set all other 2-18 segments.
STEP 3: After finish setting all 18 segments, the program will be stored, and then press
START button to load this program.
11
OPERATION GUIDE