TANDELTA OQSExISG2, Руководство пользователя

Страница: 91 / 130

Page | 89
End 3.5 Characters Time
11.3.5 Function Codes
04 (0x04) Read Input Registers
11.3.5.1 Data format
Tan Delta returns all real (non-integer) values as 16 bit signed integers with the value multiplied
by 100 (decimal).
For example, a temperature reading of 34.14 degrees C would be returned as 3414 decimal (0D56
hex).
Negative values follow the usual signed format, so -12.34 would be returned as -1234 decimal
(Fb2E hex).
11.3.5.2 Query
This reads the contents of input registers in the slave. The query message specifies the starting
register and number of registers to be read. Information needed to be read from the probe is
kept in registers:
Parameters Registers
Decimal
Registers
Hex
Access
Oil Temperature *100 0 00 RO
Ambient Temperature * 100 1 01 RO
Oil Condition * 100 2 02 RO
Cal Zero * 100 3 03 RO
Oil Temperature deg F * 100 4 04 RO
Ambient Temperature deg F * 100 5 05 RO
Oil Condition TDN * 10 6 06 RO
Alarm State 7 07 RO
Encrypted RUL 8 08 RO
End of Life Value 10 0A R/W
Instrument/Node Address 11 0B R/W
Serial Type
(Modbus/CANbus/J1939) 12 0C RO
Maximum Ambient Temp * 100 13 0D RO
Serial No. 14 0E RO
Hardware Version Number 15 0F RO
Software Version Number * 100 16 10 RO
Serial No. High Digit 17 11 RO
Oil Serial No. 0 (Low) 18 12 RO
Oil Serial No. 1 19 13 RO
Oil Serial No. 2 20 14 RO
Oil Serial No. 3 (High) 21 15 RO
Oil Serial No. 4 (RESERVED) 22 16 RO
Oil Serial No. 5 (RESERVED) 23 17 RO
Oil Serial No. 6 (RESERVED) 24 18 RO