4
TC42.NG01.C 281009-12
A large bag of ember material is shipped with the fi replace and needs to be installed to
ensure optimum performance and fl ame appearance.
Pull apart the material into ember size pieces (approximately 1” squares) and gently place
them into the burner pan. Do not compress, leave it loose for best performance.
Fill the burner pan level with the top of the pan at rear, and gradually sloping forward down
to the fi rebox fl oor at the front, covering both burner tubes.
Place remaining ember material outside of the burner pan as desired to cover-up gas lines
and brackets.
Note: Ember material placement and amount will affect fl ame appearance. More ember
material results in lower fl ame height. Add or remove as needed until desired fl ame affect.
Fig. #6
GLOWING EMBERS
Ember Material Placement
LOG GRATE
