T&C TC36ST, Инструкция по установке и эксплуатации

Страница: 21 / 40

082406-40 TC36.CSTE 21
Fig. # 43
VERTICAL TERMINATION CAP
(TCVT.9365)
FLASHING
(TO FIT 11" PIPE)
STORM COLLAR
(TC42.90665)
MASTIC
Note: Adjustable for various
roof pitches, from fl at roof to
12/12 pitch roof.
VENT PIPE
Roof vent terminal:
1) Place the roof fl ashing over top of the vent pipe and nail
securely to the roof using roofi ng nails, top and sides
UNDER shingles, lower end OVER shingles to provide
a watershed. Make weather tight by sealing with roofi ng
compound (see Fig. #43).
2) Place the storm collar down over the vent pipe until it
is level. Tighten storm collar for a snug fi t. Apply a thick
horizontal ring of mastic around the pipe at top of storm
collar (see Fig. #43).
3) Lower the roof vent terminal cap over the vent pipe and
secure in place with screws provided (see Fig. #43). Seal
screw heads and joint with caulking to prevent any moisture
entering the venting system.