Operating the Equipment Remotely
Page 4-6
Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
If the unit is controlled via NDS Director, a local lockout may be imposed.
In this case, it is necessary to relinquish the lockout from the remote
system, or to enter the local lockout pin, described in Table 4.4.
4.3
Control Mode Flowchart
The following flowchart illustrates the different control modes, and how
they affect one another.
Remote
Mode
Local
Mode
OAC
mode
OAC
Local
Lockout
Remote
Mode
Local
Mode
Set to Remote via
Display / Keypad
Set to Local via
Display / Keypad
Set to Local via
Display / Keypad
Set to OAC via
Display / Keypad
Set Local Lockout
(Cmd. from Director Head End)
Clear Local Lockout
(Cmd. from Director Head End
Set to Remote via
Display / Keypad
Set to OAC via
Display / Keypad
Set to OAC via
Display / Keypad
Set to Local Mode via Display / Keypad
(Local Lockout pin required)
Set to Remote Mode via
Display / Keypad
Set to OAC Mode via
Display / Keypad
Figure 4.1: Control Mode Flowchart
Содержание TT1220 Series
Страница 10: ...Introduction Page 1 2 Instruction Manual Professional Receivers and Decoders IRD ST TM TT1220 1 BLANK ...
Страница 18: ...Introduction Page 1 10 Instruction Manual Professional Receivers and Decoders IRD ST TM TT1220 1 BLANK ...
Страница 48: ...Alarms Page 5 2 Instruction Manual Professional Receivers and Decoders IRD ST TM TT1220 1 BLANK ...
Страница 52: ...Alarms Page 5 6 Instruction Manual Professional Receivers and Decoders IRD ST TM TT1220 1 BLANK ...