TANDBERG TT1220 Series, Инструкция по эксплуатации

Страница: 107 / 114

Alarm Categories and Conditions
Instruction Manual: Professional Receivers and Decoders (IRD) Page D-7
ST.TM.TT1220.1
Table D.8: PSI/SI Related Alarm Categories and Conditions
Alarm Category Contents
Alarm Description Remedy Default
No stream
input No stream is detected. Check input signal
and verify source. A
PAT not
present No data is received on the
PAT PID. Check input signal
and verify source. A
CAT not
present No data is received on the
CAT PID. Check input signal
and verify source. A
PMT not
present No data is received on the
PMT PID. Check input signal
and verify source. A
NIT not
present No data is received on the
NIT PID. Check input signal
and verify source. A
SDT/BAT not
present No data is received on the
SDT or BAT PID. Check input signal
and verify source. A
CA system:
TDT not
present No data is received on the
TDT PID. Check input signal
and verify source. A
D.5 Hardware Related Alarms
D.5.1 Config Alarms
The config alarms contains alarms regarding the mismatches between
present hardware, software and license keys, and the overall health of the
hardware.
Table D.9: Hardware Configuration Related Alarm Categories and Conditions
Alarm Category Contents
Alarm Description Remedy Default
Init fail General initialisation failure. Contact
TANDBERG
Television Customer
Help Desk A
Cfg. Not supp The configuration defined by
the configuration word could
not be supported. A
Config alarms:
HW err. The hardware check during
initialisation failed. A