72
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
Appendix C SIP Configuration Example
This section describes by example how to configure a TANDBERG FieldView
Device and TANDBERG FieldView Application to call each other using a
Tandberg VCS as SIP registrar and firewall traversal solution. In the example,
the TANDBERG FieldView Device and TANDBERG FieldView Application are
behind firewalls and the registrar (sipsrv.aaa.com) is located at AAA Corp. The
SIP domain is sip.aaacorp.com.
SIP Accounts
A SIP account is required for each TANDBERG FieldView Device and TANDBERG
FieldView Application that wishes to communicate.
For each account you will receive:
Uniform Resource Identifier (URI)
•
Authentication user name
•
Authentication password
•
Two accounts are required to operate one TANDBERG FieldView Device and
one TANDBERG FieldView Application. In this example the two accounts will be
assigned as follows:
TANDBERG FieldView Device
URI:
Authentication user name:
MD101
Authentication password:
12345
TANDBERG FieldView Application
URI:
Authentication user name:
MA102
Authentication password:
67890
Setup the TANDBERG FieldView Device
Enter the SIP Parameters
To configure the TANDBERG FieldView Device with device parameters provided:
Press the Display Mode button (left of the view finder, above red record
1.
button) until the Configuration menu item appears.
Select Configuration.
2.
Select Call Control > SIP Settings
3.
Check Enable SIP Registration.
4.
5.
Select SIP Settings (see Fig. C-1)
Check Device Settings.
•
In URI enter [email protected].
•
In SIP Server Address enter sipsrv.aaa.com.
•
In Authentication User Name enter MD101.
•
In Authentication Password enter 12345.
•
In Authentication Type select Digest.
•
Check TCP.
•
Tap Accept.
6.
Press the
7.
Display Mode
button.
Fig. C-2 Local User – Identification tab
Fig. C-3 Local User – SIP Server tab
Fig. C-1 FD SIP settings tab
Appendix C
