58
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
Poor radio signal.
Cause
Solution
No or low received signal.
Check the Wireless level in the Status bar. For more detailed
information check
Network Status
. Move closer to access point.
Radio interference.
Check Network Status for high signal but poor SNR. Also, inspect
area for sources of interference in the 2.4GHz band.
Poor video image.
Cause
Solution
Poor radio signal
See
Poor radio signal
above.
Insufficient bandwidth
Select lower bandwidth settings (lower bit rate). See
Guidelines
for Using Media Configuration
s
.
TANDBERG FieldView Device associates with undesired access point.
Cause
Solution
TANDBERG FieldView Device is configured to
connect with multiple APs
Delete undesired APs from the Preferred Networks list using
Configuration > Network > Wireless > Advanced >
Advanced
. See
Advanced Wireless Settings
Network not listed on CF8385PN1 Wireless Information list.
Cause
Solution
Desired radio channel is not being scanned.
Check
Configuration > Network > Radio
and verify the
channels your access points are using are selected.
See
Network>Radio
.
No wireless access points in the vicinity.
Move closer to an access point.
Access point is not transmitting its SSID.
Manually add the wireless network. See
CF8385PN1—Wireless
Information
.
Chapter 9
