TANDBERG E5714 DSNG Voyager Скачать руководство пользователя страница 6

Страница: 6 / 314

Preliminary Pages

Page vi

Reference Guide: E57xx DSNG and DENG Voyager Encoder

ST.RE.E10076.3

Warnings, Cautions and Notes

Heed Warnings

All warnings on the product and in the operating instructions should be

adhered to. The manufacturer can not be held responsible for injuries or

damage where warnings and cautions have been ignored or taken lightly.

Read Instructions

All the safety and operating instructions should be read before this product

is operated.

Follow Instructions

All operating and use instructions should be followed.

Retain Instructions

The safety and operating instructions should be retained for future

reference.

WARNINGS...

WARNINGS GIVE INFORMATION WHICH, IF STRICTLY OBSERVED, WILL PREVENT PERSONAL

INJURY OR DEATH, OR DAMAGE TO PERSONAL PROPERTY OR THE ENVIRONMENT. THEY

ARE BOXED AND SHADED FOR EMPHASIS, AS IN THIS EXAMPLE, AND ARE PLACED

IMMEDIATELY PRECEDING THE POINT AT WHICH THE READER REQUIRES THEM.

CAUTIONS...

Cautions give information which, if strictly followed, will prevent damage to equipment or other goods.

They are boxed for emphasis, as in this example, and are placed immediately preceding the point at

which the reader requires them.

NOTES...
Notes provide supplementary information. They are highlighted for emphasis, as in this example, and

are placed immediately after the relevant text.

EMC Compliance

This equipment is certified to the EMC requirements detailed in Annex B,

Technical Specification. To maintain this certification, only use the leads

supplied or if in doubt contact Customer Services.

Содержание E5714 DSNG Voyager



























































































































































































































































































































Результаты поиска

Содержание E5714 DSNG Voyager

Отзывы:

Бренды по названию

Популярные бренды

TANDBERG E5714 DSNG Voyager, Справочное руководство

Результаты поиска

Содержание E5714 DSNG Voyager

Отзывы:

Бренды по названию

Популярные бренды