TANDBERG E5714 DSNG Voyager Скачать руководство пользователя страница 103

Страница: 103 / 314

Operating the Equipment Locally — System Menu Remote Control Menu

Reference Guide: E57xx DSNG and DENG Voyager Encoder

Page 4-25

ST.RE.E10076.3

SNTP Server Option

This option sets the IP address of a Simple Network Time Protocol (SNTP)

server, which the Encoder will then synchronise it’s clock to. If the SNTP

Server is set to 000.000.000.000 the Encoder will not try and access an

SNTP server.

Ethernet Bandwidth Option

Problems can be experienced with Ethernet control of the Encoder if the

available network bandwidth is low. This option provides a low and a high

network bandwidth setting. The low bandwidth setting limits the packet

size, which can prevent problems with low bandwidth networks, but at the

cost of speed of communications.

SABus Address Option

The SABus protocol is multi-drop, and has an address byte for

differentiating between the devices on the SABus (the address option).
The Encoder can be controlled via an RS-232 or RS-485 serial interface

using a SABus protocol (see ST.TS.E10074 for details). The SABus protocol

is multi-drop, and has an address byte for differentiating between devices.

This option sets the address of the Encoder, which must be in the range 49

to 127.

Serial Protocol Option

This option selects whether the Encoder will respond to commands via its

RS-232 interface, or via its RS-485 control interface.

SABus Baud Rate Option

This option enables the SABus Baud Rate to be set.
This option sets the Baud rate for the SABus interface. The Baud rates

supported are; 1200, 2400, 4800, 9600, 19200 and 38400 Baud.

SABus Data Bits Option

This determines whether the SABus interface is expecting 8 data bits (1

stop bit), or 7 data bits (2 stop bits).

Содержание E5714 DSNG Voyager



























































































































































































































































































































Результаты поиска

Содержание E5714 DSNG Voyager

Отзывы:

Бренды по названию

Популярные бренды

TANDBERG E5714 DSNG Voyager, Справочное руководство

Результаты поиска

Содержание E5714 DSNG Voyager

Отзывы:

Бренды по названию

Популярные бренды