TANDBERG E5714 DSNG Voyager Скачать руководство пользователя страница 138

Страница: 138 / 314

Operating the Equipment Locally — Audio Menu: MPEG Layer 2

Page 4-60

Reference Guide: E57xx DSNG and DENG Voyager Encoder

ST.RE.E10076.3

Hardware Release Option

This option indicates the hardware version of this audio encode channel. It

is for status only and cannot be changed.

Software Release Option

This option indicates the software version of this audio encoder channel. It

is for status only and cannot be changed.

Audio Delay Option

This option is only available if the Auto Lip Sync option is set to Off. It sets

the delay that should be applied to the audio.

Table 4.45: Audio Delay Options

Valid Input Range

Description

Min: 111
Max: 3540

Audio Delay in milliseconds.

Actual Audio Delay

Shows the actual audio delay. It is for status only and cannot be changed.

Clip Level Option

This option is only displayed if the audio source is set to analogue. It

enables the audio clip level to be set. That is, the head room above 0 dBu

prior to the audio being clipped.

NOTE…
The clip levels available depend on the hardware issue of the Encoder.

Table 4.46: Clip Level Options

Selected Option

Description

12 dB

12 dB audio clipping level.

15 dB

15 dB is only available with PCB issue 4 and later.

18 dB

18 dB audio clipping level.

Impedance Option

This option is only displayed if the audio source is set to analogue. It

enables the input impedance of the analogue audio input to be set to

either 600

Ω

or 20 k

Ω

Deemphasis Option

This option is turned on in order to de-emphasise pre-emphasised audio

input into the Encoder.
To meet the MPEG Layer 2 audio encoding algorithm specification, the

audio must not have pre-emphasis applied. If the input signal does have

pre-emphasis applied, a de-emphasis filtering process must be applied

prior to encoding.

Содержание E5714 DSNG Voyager



























































































































































































































































































































Результаты поиска

Содержание E5714 DSNG Voyager

Отзывы:

Бренды по названию

Популярные бренды

TANDBERG E5714 DSNG Voyager, Справочное руководство

Результаты поиска

Содержание E5714 DSNG Voyager

Отзывы:

Бренды по названию

Популярные бренды