D14330.09 TANDBERG E20 ADMINISTRATOR GUIDE (TE2.1) February 2010
28
What’s in this Guide?
Introduction
Deploying E20
Using E20
The Settings
Advanced settings
The Settings
Key tones
let you determine whether you should hear a sound every time
you press a key or not. Set to On to activate.
Standby
There is a standby function in the E20. When activated the standby
function makes the screen go black after a time interval (delay) specified by
you. This setting will override the screensaver feature.
To continuously display the screensaver, the standby function must be
disabled.
Screen Saver
You may add a screensaver of your choice to the E20. You will need a USB
disk containing the photos (illustrations) you want to use as screensaver. If
the USB stick contains multiple pictures, the contents will be shown as a
gallery, one picture at a time.
A few things to observe:
•
Once you have plugged in the USB disk, the E20 will produce a dialog
asking you whether the pictures on the USB disk should be displayed by
the USB picture frame. TE 2.1 will read xcif data and even rotate images
when necessary. The prompt will let you specify the time interval
between the last time you operated (or used) the E20 and when the
screensaver should start to appear.
•
The USB disk must remain connected to the E20 to make this work.
•
The following file formats are supported:
*.bmp, *.gif, *.ico, *.jpeg, *.jpg, *.mng, *.pbm, *.pgm, *.png, *.ppm,
*.svg, *.tif, *.tiff, *.xbm, *.xpm
System information
This is an information panel only, providing information on
•
System name
•
Uptime
•
Network IP address
•
SIP address
•
SIP proxy address
•
SIP status
•
E20 software version
•
Hardware Module serial number
•
MAC address
When in a call the following is also provided:
•
Remote URI
•
Call rate
•
Protocol
•
Video protocol
•
Video resolution
•
Video channel rate
•
Video Packet loss (in numbers and in %)
•
Video Jitter
•
Audio protocol
•
Audio Channel rate
•
Audio Packet loss (in numbers and in %)
•
Audio jitter
•
Encryption type
•
Encryption status
Bluetooth™
You may connect a Bluetooth™ headset to the E20. To do that, you have
to turn the Bluetooth support in the E20 to <b>On</b> and set your
Bluetooth device in pairing mode.
Advanced
The Advanced settings are described in detail in the next chapter.
