D14330.09 TANDBERG E20 ADMINISTRATOR GUIDE (TE2.1) February 2010
8
What’s in this Guide?
Introduction
Deploying E20
Using E20
The Settings
Advanced settings
Introduction
Vibration
Do not operate the apparatus in areas with vibration or place it on an
unstable surface.
Power Connection and Hazardous Voltage
The product may have hazardous voltage inside.
•
Never attempt to open this product, or any peripherals connected to the
product, where this action requires a tool.
•
This product should always be powered from an earthed power outlet.
•
Never connect attached power supply cord to other products.
•
In case any parts of the product has visual damage never attempt to
connect main power, or any other power source, before consulting
service personnel
•
The plug connecting the power cord to the product/power supply serves
as the main disconnect device for this equipment. The power cord must
always be easily accessible.
•
Route the power cord so as to avoid it being walked on or pinched by
items placed upon or against it. Pay particular attention to the plugs,
receptacles and the point where the cord exits from the apparatus.
•
Do not tug the power cord.
•
If the provided plug does not fit into your outlet, consult an electrician.
•
Never install cables, or any peripherals, without first unplugging the
device from its power source.
Servicing
•
Do not attempt to service the apparatus yourself as opening or removing
covers may expose you to dangerous voltages or other hazards, and will
void the warranty. Refer all servicing to qualified service personnel.
•
Unplug the apparatus from its power source and refer servicing to
qualified personnel under the following conditions:
•
If the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the apparatus.
•
If objects have fallen into the apparatus.
•
If the apparatus has been exposed to rain or moisture
•
If the apparatus has been subjected to excessive shock by being
dropped.
•
If the cabinet has been damaged.
•
If the apparatus seems to be overheated.
•
If the apparatus emits smoke or abnormal odor.
•
If the apparatus fails to operate in accordance with the operating
instructions.