Advanced Use
TANDBERG Director Videoconferencing System
59
Dual Monitor
O
N
Selfview, snapshots and DuoVideo
TF
will be displayed on the 2nd monitor.
O
FF
The 2nd monitor shows Selfview only.
Auto-PIP
O
N
Your selfview will automatically be displayed (as a Picture-in-picture) whenever
the camera position or video source is changed. Picking up the remote control
will also display your selfview.
Welcome Menu
The Welcome menu can be shown when the system is not in use, and when sleep-mode is not
activated.
O
N
The Welcome Menu is shown when the system is not in sleep mode.
O
FF
The Welcome Menu is not shown.
L
OGO
If a logo is uploaded to the system, it will be shown when this button is selected.
See also
A
PPENDIX
5
.
Continuous Presence
O
N
The screen is divided into three or four
blocks, each displaying the video image of
a different participant.
O
FF
The active site will be displayed in full
screen during a MultiSite
TF
conference. Also
called Voice Switched mode.
MCU status line
O
N
The MultiSite
TF
/MCU/DuoVideo
TF
indicators will be displayed and provide
information about the conference.
O
FF
The MultiSite
TF
/MCU/DuoVideo
TF
indicators will not be displayed.
A
UTO
The MultiSite
TF
/MCU/DuoVideo
TF
indicators will be displayed for a few seconds
and then timed out. When grabbing the remote control, the indicators will be
shown again.
System Name
Identifies the system:
•
during an MCU conference call.
•
when using the Web-interface.
•
when the codec is acting as an SNMP Agent.
•
towards a DHCP server.
•
as an H.323 ID. Other systems can call us using this name instead of IP-number/IP-address.
Menu Password
Enter the code which should be entered to get access to the menu system on the TANDBERG
system. When pressing the
MENU
button on the remote control, the user will be asked to enter the
Password written here.
T I P
T
O
DISPLAY
YOUR
SITE
IN
FULL
SCREEN
WHEN
‘O
N
’
IS
SELECTED
,
PRESS
THE
Q
UICK
KEY
‘R
EQUEST
F
LOOR
’.
TF
- TANDBERG F
IRST
