TANDBERG Director Videoconferencing System
46
Manual Dialing
To manually dial a number:
1.
In the
ADDRESS
BOOK
select the
MANUAL
DIAL
button.
2.
Enter the number of the desired site using the
KEYPAD
. Press
DELETE
to remove the last
character or
CLEAR
to start again.
3.
Press
SELECT
QUALITY
to change the call bandwidth from the default. Use the
UP
/
DOWN
ARROWS
to scroll through the available call bandwidths.
4.
Press the green
CONNECT
button. The call will be established as defined.
5.
If the remote site is not answering select the red
HANG
UP
button to disconnect the call.
6.
When the call is established the
Videoconference Main Screen
will be displayed.
On the
Manual Dial screen
the following controls are also available:
R
EDIAL
will attempt to call the last manually dialed number.
C
ALL
S
TATUS
will display information on the currently connected calls. Press the
BACK
button to exit from this screen.
D
IRECTORY
will bring you back to the
Address Book screen
.
Disconnecting a Call
An active videoconference call can be disconnected at any time.
1.
On the
TASKBAR
select
CALL
CONTROL
to access the
Call Control screen
.
2.
Select the red
HANG
UP
button.
3.
You will be asked to confirm:
‘Yes, Hang up.’
