11304801 Page 6
Installation Sheet
TANDBERG 8000
MXP
2. Language
Open
General
menu. Select
Language
and press save.
3b. ISDN Configuration
Open
Network - ISDN/External/Leased E1/T1
and
select
ISDN-BRI Settings
or
ISDN-PRI Settings
. Make
the ISDN configuration and press save.
1. Open the Control Panel
Choose
Control Panel
from the main menu and press
the OK button on the remote control.
8) Video System - Quick Setup
3a. Network Configuration
Open
Network
>
LAN Settings
. Configure
IP Settings
and
H.323 Settings
and press save.
Please read the Administrator Guide found on the user manuals CD for further details.
TIP
If the menu is not already present, press the
OK/Menu key on the remote control to open the
menu. Navigate in the menus with arrow keys
and OK button.
OK/Menu
button
NOTE
The TANDBERG Remote Control is available
in two versions; the TRC3 and TRC4. The
illustration above shows the TRC3.
The IR sensors for the remote control are placed at the lower
right of each monitor. Use the TANDBERG Remote Control to
access the video system menus.
