11304801 Page 4
Installation Sheet
TANDBERG 8000
MXP
3) TANDBERG Precision HD Camera
Place the camera centrally on top of the Monitor Frame.
1.
Make sure it is placed in parallel to the edge of the front of
2.
the Monitor in order to allow the IR sensor to pick up the
signals from the remote control.
4) Connecting Cables
Please connect the following cables to the monitors:
Use the Allen key and remove the Rear Base Cover from the base.
1.
Connect 1.5m DVI-DVI cable marked
2.
DIGITAL/RGB IN, Main Monitor
to the
Input 2
on the right hand monitor (when
viewed from the rear).
Connect 1.5m DVI-DVI cable marked
3.
DIGITAL/RGB IN, Dual Monitor
to the
Input 2
on the left hand monitor.
Connect power to
4.
AC IN
on both monitors.
Please connect also the cables for microphones, camera and network (ISDN/LAN) cables (for details see the
5.
Administrator Guide > Interfaces & Sockets > Codec 6000 MXP, which is found on the User Manuals CD).
5) Rear Panels
Put on the Rear Base cover and the
Rear Frame cover and ensure that all
cables are stored away correctly.
Screws and lock washers are found
in the accessories box.
6) Turn on the Video System
Turn the monitors on by pressing the On/Off power switch,
1.
placed at the bottom, in the back of each monitor.
Turn the Codec on by pressing the On/Off power switch on
2.
the codec. The Unit Codec is found in the base.
Rear Frame
cover
Rear Base
cover
Power
On/Off
Power
On/Off
Codec
On/Off
