Tandberg Data VXA-320 (VXA-3), Руководство по эксплуатации продукта

Страница: 27 / 90

O
CTOBER
2006
VXA-320 T
APE
D
RIVE
13
I
NSTALLING THE
T
APE
D
RIVE
Using the screws provided with the tape drive, secure the tape drive in the
drive bay using one of the screw mounting combinations (see Figure 2-5 ).
3. Power on the computer system or enclosure.
During the tape drive’s power-on self-test, the LEDs scroll sequentially
right to left, then left to right in amber and green. LED 4 illuminates in red
and green. When POST is complete, LED 4 illuminates in green. (See
Table 3-1, “LED states,” on page 20 for a description of the LED states.)
Caution
To avoid damaging the tape drive, follow these precautions:
Use only the M3
×
0.5
×
5 mm Phillips screws. Screw length must not exceed
5mm.
Ensure that the chassis is not distorted. (Alignment to the horizontal or vertical
plane should not exceed
±
10°.)
Ensure that no objects (screw heads, cables, or adjacent devices) are pressing
against the frame.
Do not use a combination of the two sets of mounting holes.
Do not obstruct the ventilation fan on the back of the tape drive.
Figure 2-5 Screw mounting configurations (internal model)
3
3
Side mounting
Bottom mounting