Tandberg Data VXA-320 (VXA-3) Скачать руководство пользователя страница 47

Страница: 47 / 90

CTOBER

2006

VXA-320 T

APE

RIVE

ATHERING

ROUBLESHOOTING

NFORMATION

FOR

ECHNICAL

UPPORT

Check all SCSI cables connectors for bent pins and confirm that all

connectors are firmly seated.

PERATING

YSTEM

NFORMATION

Operating system.

What operating system is being used? Are all current

patches installed?

Device drivers.

Are the appropriate drivers installed for the SCSI host bus

adapter? Refer to the installation instructions for your SCSI host bus adapter

card.

ACKUP

PPLICATION

NFORMATION

Backup application name and version.

What backup application is being

used?

Compatibility.

Does your application support the VXA-320 (VXA-3) tape

drive? Refer to the supported hardware devices list from the application

provider.

Device driver.

Is the appropriate driver installed for the tape drive? Refer to

the installation instructions for your backup application.

Backup application log files.

Have the log files from your backup

application ready to send to Technical Support.

APE

RIVE

IAGNOSTIC

NFORMATION

Write/Read test results.

Use VXATool and run a Write/Read test and then

capture the diagnostic log from the tape drive and save it to a file. Have the

diagnostic log file ready to send to Technical Support. Refer to the readme

file or on-line help available with the VXATool for detailed instructions.

If the VXATool Write/Read test reports an error, clean the tape drive and run

the test again on a new tape.

Diagnostic log taken after an error.

Use VXATool to capture the diagnostic

log from the tape drive immediately after your backup application reports

an error.

Содержание VXA-320 (VXA-3)



























































































Результаты поиска

Содержание VXA-320 (VXA-3)

Отзывы:

Похожие инструкции для VXA-320 (VXA-3)

Бренды по названию

Популярные бренды

Tandberg Data VXA-320 (VXA-3), Руководство по эксплуатации продукта

Результаты поиска

Содержание VXA-320 (VXA-3)

Отзывы:

Похожие инструкции для VXA-320 (VXA-3)

Бренды по названию

Популярные бренды