Tandberg Data VXA-320 (VXA-3), Руководство по эксплуатации продукта

Страница: 74 / 90

60
P
RODUCT
M
ANUAL
433689-01
C
HAPTER
7 S
PECIFICATIONS
Vibration Specifications
Table 7-19 lists the operating specifications that indicate the amount of
vibration the tape drive can withstand while reading and writing data.
E
NVIRONMENTAL
C
ONDITIONS FOR THE
VXA
TAPE
C
ARTRIDGES
Table 7-20 summarizes the environmental requirements for the VXAtape
cartridges. You should maintain the temperature and humidity at a steady
level within these ranges, and also limit fluctuations in temperature and
humidity.
Note: When a VXAtape is brought into the room where the VXA tape drive is
located, allow the VXAtape to adjust to room temperature and humidity
before using it.
Table 7-19 Vibration specifications
Random vibration
a
applied during operation (reading and writing)
a
A 0.5 Grms random vibration spectrum is applied to each of three orthogonal axes for a minimum of 30
minutes per axis.
10 Hz to 500 Hz PSD = 0.0005102 g
2
/Hz
Random vibration
b
applied during non-operation (unpacked) and storage (in
original packaging)
b
A 1.06 Grms random vibration spectrum is applied to each of three orthogonal axes for a minimum of 20
minutes per axis.
1 Hz to 400 Hz
Vibration applied during shipping (in original packaging)
ISTA Procedure 2A
Swept sine applied during non-operation
c
and operating
d
5 to 500 to 5 Hz
c
10 to 500 Hz
d
c
Three sweeps at one octave per minute are applied to each axis at 0.75 g (peak) input.
d
One sweep at one-quarter octave per minute are applied to each axis at 0.5 g (peak) input.
Table 7-20 Temperature and humidity specifications for the VXAtape cartridges
Specification Storage
a
/
Nonoperating
Transporting
a
Temperature range +5°C to +32°C
(+41°F to +90°F)
–40°C to +45°C
(–40°F to +113°F)
Temperature variation 1°C per min; max. 20°C per hour
(2°F per min; max. 36°F per hour)
Relative humidity 20% to 60%
non-condensing
5% to 80%
non-condensing