25
OF
28
R
ECONFIGURING
THE
L
IBRARY
AND
R
ESUMING
O
PERATION
R
ECONFIGURING
THE
L
IBRARY
In order for the library to recognize the new tape drive, you must set the tape drive
configuration to match the tape drives that are installed in the library.
Note:
Do
not
connect the SCSI cables at this time.
To set tape drive configuration:
1.
At the Home screen, press
Drive
.
If necessary, enter the operator panel password (see
page 72
).
2.
Press
until the selection arrow (
) points to
Drive Configuration
.
3.
Press
Select
.
Note:
The library lists “no drive” only if there is no room for more tape drives. For
example, in the above screen, the StorageLibrary T48 library has two half height
tape drives. The four tape drive number is for four half height tape drives.
Drive
Drive ID
Drive SCSI ID
Drive Configuration
Library SCSI Bridge
Select
Back
Drive Configuration
1:
HP LTO-2 HalfHigh
2:
HP LTO-2 HalfHigh
3:
no drive
4:
no drive
Modify
OK
