Tanco Autowrap - I70 Bale Shear
Operator’s Manual
10
Fitting the Bale Shear Bucket
To use the Bale Shear Bucket the attachment kit items must first be fitted. The kit items consist of a plunger pin and linkage which is
operated by the film gripper hydraulic cylinder.
1. Fully open the Bale Shear and tilt slightly forward. Approach the bucket with the outer tines in line sockets on the back of the bucket.
2. Level the Bale Shear and drive forward. Then tilt fully back to get the bucket to slide on to the tines.
5. OPERATING INSTRUCTIONS
