Tanco Autowrap - I70 Bale Shear
Operator’s Manual
8
5. OPERATING INSTRUCTIONS
Operating the Bale Shear for Round Bales
Note: Before you use the Bale Shear check the sharpness of the blades if required sharpen with a file
1. With the Bale Shear fully open and with the tines resting on the ground, approach the bale and move the tractor forward until
the bale is pressed tightly against the Shear Grabs’ main frame.
2. Move the hydraulic control lever to close the shear frame down onto the bale, whilst at the same time the gripper closes and
grips the plastic.
3. Transport the bale to where it is to be split and operate the hydraulic control lever to close the Bale Shear so that it pierces the
plastic wrap and slices the bale down the centre.
