Tanco Autowrap 1300 EH, Руководство оператора

Страница: 21 / 36

21
Tanco Autowrap 1300 EH
Operator’s manual
3 Operator Setup Menu
The default settings for the machine are developed by Tanco for optimal operation of the machine. However,
the operator can change certain parameters in the ‘Operator Setup’ menu to take account of operational
conditions.
Parameter Default Application Description
‘Film Break’ OFF N/A N/A
‘Double Drive’ OFF 1514S, 1514T
only
Set ‘ON’ to enable both pairs of rollers to be driven.
‘Stop Bale
Rotation’
No 1510S, 1514S,
1514T only
Set ‘Yes’ to delay bale rotation for a preset time period
after the wrap cycle begins.
This enables additional wraps of film to be applied for
extra strength e.g. when wrapping two bales together.
‘Delay to Slow’ 1.0s
0.4s
1300EH, 1510S,
1514
1510T, 1514T
Determines the point of speed reduction at the end of
the wrapping cycle
‘Delay to Stop 1.0s
0.9s
1300EH, 1510S,
1514
1510T, 1514T
Set to adjust the Stop position of the wrap arm
‘Rotation After’ 0.0s All Set time period to rotate the bale to an optimal
orientation for unloading
‘IN Hold Time’ 0.0s All Sets the latch-on time period for closing the bale rollers.
Effectively allows ‘one touch’ operation instead of
having to hold the switch in Automatic mode.
Does not apply when in Manual mode
‘OUT Hold Time’ 0.0s All Sets the latch-on time period for opening the bale
rollers. Effectively allows ‘one touch’ operation instead
of having to hold the switch in Automatic mode.
Does not apply when in Manual mode
‘Bale Hold ON’ 0.0s All Sets the latch on time period for indexing a bale.
Effectively allows ‘one touch’ operation instead of
having to hold the switch in Automatic mode
(e.g. to index a ¼ turn).
Language English All Sets the language for the display prompts.