20
Tanco Autowrap 1300 EH
Operator’s manual
2.6
Selecting a Store Total
There are 10 individual memory regis ters labelled ‘Store A’ to ‘Store J’ for bale totals. Each time a bale cycle
is completed, the currently selected store total and the grand total increments by 1.
The currently selected store is displayed on one of the two screens selectable in the normal operating mode.
The default setting is Store A. To select a particular store, navigate the display menu using the 4-way
switch.
Press the up/down arrow keys to select the store, then press the ENTER key to confirm the selection.
2.7
Resetting a Store Total to Zero
Stores A to J can be individually reset to zero at any time. The Grand Total store cannot be reset. First
select the store to be zeroed, then navigate the display menu as shown below.
Press the ENTER key to reset.
2.8
Setting the Number of Wraps
The default number of wraps is 16. You can set the target number from 0 to 99 by navigating the display
menu as shown below.