Tanaka AD-6, Инструкция по эксплуатации

Страница: 33 / 45

- 32 -
10 Maintenance
10.1 Inspecting and Replenishing Circulating Solution
Before using this tester, check the circulating solution. If the solution level is low, replenish the
solution as explained below.
The tester will be damaged if used without adequate circulating solution. In cold areas, use
antifreeze. If the circulating solution freezes, the tester will be damaged.
(1) Remove the circulating solution verification window from the left side of the tester (see Fig. 14).
(2) Remove the cap of the circulating solution tank and replenish the solution to MAX (see Fig. 15).
(3) Return the removed items to their original positions.
Solution tank
Solution check
window
Remove this screw
Fig.14 Check window
Fig.15 Solution tank