Individual Adjustments and Setups
GOLDEN EAGLE
Setup SONY BVE
When the Sony BVE editors sends his non-standard information, the
GOLDEN EAGLE
series inter-
face detects it automatically. To adjust that signals correctly, use the default values or make you indivi-
dual adjustments, see tables below.
The default setup carried out, that the image of the BVE signal fits at the best to the screen.
BVE signals at VGA input port for HCM 113 / 115:
Signal Format
GEOMETRY SETTINGS INPUT
GEOMETRY SETTINGS DISPLAY
Pixel
Clock /
MHz
Phase
X-Position
Y-Position
Pixel
Lines
Interlace
Pixel
Lines
X-Position
Y-Position
BVE 9000
42.57
16
-85
-4
1920
262
No
1024
768
0
0
BVE 2000
85.96
16
-62
-7
1920
526
No
1024
768
0
0
BVE signals at VGA input port for HCM 117 / 120:
Signal Format
GEOMETRY SETTINGS INPUT
GEOMETRY SETTINGS DISPLAY
Pixel
Clock /
MHz
Phase
X-Position
Y-Position
Pixel
Lines
Interlace
Pixel
Lines
X-Position
Y-Position
BVE 9000
42.57
16
-85
-4
1920
262
No
1280
1024
0
0
BVE 2000
85.96
16
-62
-7
1920
526
No
1280
1024
0
0
Interfacing the BVE 2000
The VDU output at the BVE is made as a 9pin Sub-DF connector and a special cable is needed for the
connection to the monitor. Use a high-quality single shielded 75 Ohms multiple coax-cable for this
special interconnection.
The pin-out of the cable Sub-HD15M to Sub-D9M port is shown in following table:
Pin @
HD15M
Function @ Monitor
Pin @ D9M
Function @ BVE Editor
Pin @
HD15M
Function @ Monitor
Pin @ D9M
Function @ BVE Editor
1
R Video
3
R Video
9
not connected
2
G Video
4
G Video
10
Ground Sync
1
Ground
3
B Video
5
B Video
11
not connected
4
not connected
12
not connected
5
not connected
13
Composite Sync
8
Composite Sync
6
Ground R Video
1
Ground
14
not connected
7
Ground G Video
1
Ground
15
not connected
8
Ground B Video
1
Ground
Shield
Ground
Shield
! not connected !
Leave all not named pins at the Sub-D9M open.
© 02.07 TAMUZ - LCD Video Monitors
HCM Series Broadcast Monitor
Page - 96 -
