Connections of the Monitor
GOLDEN EAGLE
Video Inputs at Version HCM 1xx VB
The version
HCM
1xx DB
of the
GOLDEN EAGLE
series was designed for analog composite video si-
gnals in the formats PAL, SECAM or NTSC and VGA graphic signals. Optionally a DVI port can be
equipped.
Connect your video source using standard 75 Ohm BNC cables to the input ports at the rear of the
monitor. The inputs are internally 75 Ohm terminated. There is no need for an external standard 75
ohm terminating resistor. Connect your VGA graphic source using standard Sub-HD15 cables to the
input ports at the rear of the monitor.
BNC Inputs
Depending on the version of the device the allocation of the ports varies. The respectively BNC jack
pair is described as input and loop. The loop is an active loop, no signal comes out if power off. De-
tails see the table below or at the rear of the monitor.
The allocation of the BNC ports is shown in following table:
Model / Interface
Type
Series
Format
VGA 1 In
VGA 2 In
CCVS 1 In
CCVS 2 In
CCVS 3 In
SDI In
HCM 1xx DB
GOLDEN EAGLE
PAL / NTSC / Secam
VGA
VGA
CCVS
CCVS
YC
---
Optional Input YC
As an option of the
HCM 1xx
GOLDEN EAGLE
series the right pair of BNC ports is defined as a YC
input, left as Y (Luminance) and right as C (Chrominance). The YC signal input is separated, use a ad-
apter to split the 4pin Mini-DIN connections.
Optional Input DVI
As an option of the
HCM 1xx DB
of the
GOLDEN EAGLE
series a DVI input can be equipped. This
option has been equipped when ordered.
Signal Format
The video monitors
HCM 1xx DB
of the
GOLDEN EAGLE
series are designed as a MultiFormat and
MultiSync monitors to be used with signals in the format PAL/SECAM 625/50 or NTSC 525/60, regard-
less if analog or digital version.
© 02.07 TAMUZ - LCD Video Monitors
HCM Series Broadcast Monitor
Page - 25 -
